The lifespan of a well-built tarmac driveway made of asphalt is in the range of one decade to two decades. The things that end up affecting the lifespan of the tarmac include the climatic conditions of the place, the type of use of the driveway, and the quality of the installation. While the three factors are most important, their level of importance varies according to additional minor factors. The key issue here is how to maintain your tarmac driveway after installation. All other knowledge would be unnecessary when there is no driveway to maintain.
Recover Old Tarmac with Active Cleaning
If you clean tarmac the right way, then you can get it back to functional, attractive, and useful status again. The cleaning is different from the cleaning you would do to a home or commercial building and paved area. A driveway is a major infrastructure in many organized settlements across the world, and its cleaning must consider all input and use factors that define its status and affect its robustness as a transportation utility. Cleaning will rely on the use of restoring agents fit for particular locations and local conditions.
Use Sealant for a Perfect Restoration
When restoring tarmac, use sealant because it is cheaper than laying new tarmac. Consider a product with positive environmental benefits such as no emission, reduced waste, and increased longevity. It’s better to have a long-lasting sealant because it reduces a need to repeat the job frequently and it saves the need to burn gas or other types of fuel while doing the restoration job. Make sure the sealant is protecting the tarmac from oil and petrol spills because they are some of the known culprits for destroying an otherwise perfect tarmac surface.
Follow Correct Sealing Procedures
You may have the right products for maintenance and continue getting wrong results such as tarmac that does not last. Nevertheless, the right steps can ensure that no product used in the maintenance process is wasteful and inefficient. Let each layer of sealant dry as recommended by manufacturers, which can be two to three days.
Keep Driveways Watered
The best way to prevent the driveways from drying and becoming hard then cracking is by water them on certain occasions. Unlike plants that will need frequent watering, driveways need wetting only during the driest seasons such as in high-temperature summers. Water is an effective coolant that will evaporate and cause the remaining tarmac sealant to stay in place at a much cooler temperature.
Keep Seed Limits
You will need half a year when doing a complete restoration of driveways that were in a dilapidated state. In this case, put speed limits signs to ensure users do not drive at fast speeds that might aggravate pits and gorges in the tarmac. Use of ramps with wooden reinforcements will also help to ensure even distribution of vehicle weight during the recovery period. After a full recovery, the tarmac should be ready for normal use until the next scheduled maintenance.